Leak detection and repair across Sydney for 30+ yearsCall or SMS 0412 000 893 · 1choicebm@gmail.com

Leaking shower repair in Bondi: water staining the carpet in the next room

A shower in a Bondi house was leaking through failed grout. Water was tracking under the tiles and causing damp and staining in the carpet of the adjoining room. We removed the grout throughout the shower, regrouted with epoxy grout, renewed every silicone joint and sealed the shower in about 2 hours, with no tiles removed. The shower was tested after a 24-hour cure and showed no leaks.

BeforeBefore: Shower with white wall tiles and a dark tiled floor, with discoloured, failed grout along the floor and at the base of the walls
AfterAfter: The same shower with renewed grout on the walls and floor and new silicone at every joint
Bondi shower: failed, discoloured grout before; fully regrouted, resiliconed and sealed after

The job at a glance

  • Location: Bondi, NSW 2026
  • Property: house
  • Problem: shower leaking through failed grout, causing damp and staining in the carpet of the adjoining room
  • Work: full shower regrout with epoxy grout, all silicone joints replaced, shower sealed
  • Time on site: about 2 hours
  • Back in use: after 24 hours of curing
  • Tiles removed: none
  • Result: tested after the 24-hour cure, no leaks evident
  • Completed: November 2026

The problem

The carpet in the room adjoining the bathroom was damp and water-stained. Our inspection traced the moisture back to the shower.

What we found

The grout in the shower had cracked and broken down, allowing water to pass through the joints and track under the tiles. The waterproofing beneath the tiles was no longer containing that water, so it was moving through to the adjoining room and appearing as moisture and staining in the carpet.

What we did

  1. Removed the existing grout throughout the shower.
  2. Cut out all existing silicone.
  3. Regrouted the full shower with epoxy grout.
  4. Installed new silicone at every joint.
  5. Sealed the shower and allowed 24 hours for it to cure.

Time on site was about 2 hours. No tiles were lifted and the membrane beneath them was not replaced. The repair stops water at the tiled surface, so it can no longer reach the area under the tiles.

The result

The shower was tested after the 24-hour cure and no leaks were evident. It was then returned to normal use.

Can a shower leaking into the next room be repaired without removing tiles?

Often, yes. Where the tiles are sound and water is entering through failed grout and silicone, the leak can usually be stopped from the surface, as it was on this Bondi job. Common signs are damp carpet, swollen skirting boards or bubbling paint on the other side of the bathroom wall. We inspect first and confirm whether a non-invasive repair is suitable. See our leaking shower repairs

We cover Bondi and the rest of the eastern suburbs. See leaking shower and balcony repairs in Bondi and Randwick.

Every shower is different. We'll inspect yours first and tell you honestly whether a non-invasive repair is right for it.

Leaking shower or balcony?

We'll inspect it and quote for free, anywhere in Sydney. If the tiles are sound, we can usually stop the leak without lifting them. The sealing product we use carries a manufacturer's product warranty of up to 25 years, under the manufacturer's terms.

CallSMSFree quote

Book a free inspection

Prefer to talk? Call 0412 000 893 or send an SMS.

Leave your name, phone number and suburb and we'll call you back to book a free inspection.

Mobile or landline, so we can call you back

Add more details (optional: property type, urgency, photos)

One wide shot of the whole area, then close-ups of the grout, corners and where the water shows up. JPG, PNG, HEIC or WebP, up to 8 MB each.

    By sending this, you agree to us contacting you about your enquiry and keeping the details and photos you send, as set out in our privacy information.

    We'll call you back shortly, 7 days a week. Want to talk now? Call or SMS 0412 000 893.