Leak detection and repair across Sydney for 30+ yearsCall or SMS 0412 000 893 · 1choicebm@gmail.com

Leaking shower repair in Kellyville: deteriorated grout and damp in the wall

A shower in a Kellyville house had deteriorated grout and mould. Water was tracking under the tiles and causing moisture and dampness in the wall. We removed the grout throughout the shower, regrouted with epoxy grout, renewed every silicone joint and sealed the shower in about 2 hours, with no tiles removed. The shower was tested after a 24-hour cure and showed no leaks.

BeforeBefore: Shower floor of patterned mosaic tiles with dark, deteriorated grout and mould along the base of the wall
AfterAfter: The same shower with clean new grout on the floor and walls and new silicone at the joints
Kellyville shower: deteriorated grout and mould before; fully regrouted, resiliconed and sealed after

The job at a glance

  • Location: Kellyville, NSW 2155
  • Property: house
  • Problem: deteriorated grout and mould in the shower, with moisture and dampness in the wall
  • Work: full shower regrout with epoxy grout, all silicone joints replaced, shower sealed
  • Time on site: about 2 hours
  • Back in use: after 24 hours of curing
  • Tiles removed: none
  • Result: tested after the 24-hour cure, no leaks evident
  • Completed: October 2026

The problem

The grout in the shower had deteriorated and mould had built up in the joints. The wall beside the shower was showing moisture and dampness.

What we found

Water was passing through the deteriorated grout and tracking under the tiles. From there it was reaching the wall, which is what was causing the moisture and dampness.

What we did

  1. Removed the existing grout throughout the shower.
  2. Cut out all existing silicone.
  3. Regrouted the full shower with epoxy grout.
  4. Installed new silicone at every joint.
  5. Sealed the shower and allowed 24 hours for it to cure.

Time on site was about 2 hours and no tiles were removed. The repair stops water at the tiled surface, so it can no longer reach the area under the tiles.

The result

The shower was tested after the 24-hour cure and no leaks were evident. It was then returned to normal use.

Can mouldy, deteriorated shower grout cause a damp wall?

Yes. Once grout breaks down, water can pass through the joints, track under the tiles and reach the wall behind or beside the shower. Mould that keeps returning in the grout lines and a damp or musty wall nearby are common signs. Where the tiles are sound, the leak can usually be stopped from the surface, as it was on this Kellyville job. We inspect first and confirm whether a non-invasive repair is suitable. See our leaking shower repairs

We cover Kellyville, Rouse Hill and the Hills District. See leaking shower and balcony repairs in Kellyville and Rouse Hill.

Every shower is different. We'll inspect yours first and tell you honestly whether a non-invasive repair is right for it.

Leaking shower or balcony?

We'll inspect it and quote for free, anywhere in Sydney. If the tiles are sound, we can usually stop the leak without lifting them. The sealing product we use carries a manufacturer's product warranty of up to 25 years, under the manufacturer's terms.

CallSMSFree quote

Book a free inspection

Prefer to talk? Call 0412 000 893 or send an SMS.

Leave your name, phone number and suburb and we'll call you back to book a free inspection.

Mobile or landline, so we can call you back

Add more details (optional: property type, urgency, photos)

One wide shot of the whole area, then close-ups of the grout, corners and where the water shows up. JPG, PNG, HEIC or WebP, up to 8 MB each.

    By sending this, you agree to us contacting you about your enquiry and keeping the details and photos you send, as set out in our privacy information.

    We'll call you back shortly, 7 days a week. Want to talk now? Call or SMS 0412 000 893.