Bathroom floor regrout in Mona Vale: old, discoloured grout renewed
The bathroom floor of a Mona Vale house had old, discoloured grout and was due for a refresh. We removed the old grout, regrouted the floor with epoxy grout, replaced the silicone and sealed the floor in about 2 hours, with no tiles removed. The bathroom was back in use after a 24-hour cure.


The job at a glance
- Location: Mona Vale, NSW 2103
- Property: house
- Brief: refresh a bathroom floor with old, discoloured grout
- Work: floor regrouted with epoxy grout, silicone replaced, floor sealed
- Time on site: about 2 hours
- Back in use: after 24 hours of curing
- Tiles removed: none
- Completed: September 2026
The brief
This job was a refresh rather than a leak repair. The grout across the bathroom floor was old and discoloured, and the owner wanted the floor brought back to a clean, even finish without retiling.
What we did
- Removed the old grout from the floor joints.
- Regrouted the floor with epoxy grout.
- Cut out and replaced the silicone.
- Sealed the floor and allowed 24 hours for it to cure.
Time on site was about 2 hours and no tiles were removed.
The result
The floor now has clean, even grout lines and new silicone, with the original tiles kept. The bathroom was returned to normal use after the 24-hour cure.
Is regrouting worth it if the bathroom is not leaking?
Often, yes. Where the tiles are sound, regrouting renews the appearance of a tiled floor without the cost and disruption of retiling. New epoxy grout and silicone also help keep water out of the joints. We inspect first and confirm whether regrouting suits the floor. See our regrouting service
We cover Mona Vale and the rest of the Northern Beaches, from Manly up to Palm Beach. See leaking shower and balcony repairs on the Northern Beaches.
Every floor is different. We'll inspect yours first and tell you honestly whether regrouting is right for it.
Leaking shower or balcony?
We'll inspect it and quote for free, anywhere in Sydney. If the tiles are sound, we can usually stop the leak without lifting them. The sealing product we use carries a manufacturer's product warranty of up to 25 years, under the manufacturer's terms.